|
All Features:
- Barometric Pressure with Graph
- Weather Forecast
- Atomic Clock
- Wind Speed & Direction
- Wind Gusts, Wind Chill & Average Speed
- Adjustable Wind Reporting Interval!
- Wind Alarm / Storm Alarm
- Moon Phase
- Calendar
- Dew Point
- Heat Index
- Automatic time adjustment (incl. DST changes) & date adjustment.
- Radio tower and waves icon indicates successful signal reception.
- U.S. time zone is user-selectable for PST, MST, CST, or EST.
- Automatic DST changes can be disabled if you do not observe DST.
- Clock can be manually set if desired.
- Time is displayed as hh:mm:ss in 12-hour format with PM.
- Month, date, weekday, and moon phase are also displayed.
- Calendar and moon phase information is pre-programmed through 2050.
- Clock has a daily alarm with available 5-minute snooze function.
- Wireless 433MHz transmission of outdoor temp, humidity, and wind data from remote sensors.
- One thermo-hygro and one wind sensor are included.
- Main unit displays the following weather data:
o Indoor temperature and humidity
o Outdoor temperature and humidity with trend arrrows
o Heat index, wind chill, and dew point (selectable)
o Wind speed average with speed trend arrow
o Wind direction and gust speed
o Weather forecast icon
o Barometric pressure and pressure-change history bar graph
- Temperature unit is user-selectable for F or C.
- Wind speed unit is user-selectable for mph, kph, or knots.
- Barometric pressure unit is user-selectable for inHg or mb/hPa.
- Alarms can be programmed for indoor and outdoor temperature and humidity, heat index, wind chill, dew point, wind speed, and storm.
- Station memory records daily and long-term maximum and minimum values for indoor and outdoor temperature and humidity, barometric pressure, wind speed average, wind chill, heat index, and dew point. Long-term values are displayed with time and date stamp.
- Altitude can be programmed and icon for current weather can be selected during setup for maximum forecast accuracy
- Main unit displays low-battery icons for itself and all remotes in use.
- Main unit can be wall-mounted or (with included base attached) free-standing.
- Remotes can mount on a vertical surface via included screws and wall anchors, and they can also be pole-mounted on schedule 40 PVC pipe (not included).
|