Surge Protector

For upgraded protection against lightning-induced power surges, power-cross conditions, and ground potential rises, use Surge Protectors with any of our weather stations. For installation on cable runs between:

1. Sensor and junction box or sensor interface module.

2. Console and junction box or sensor interface module.

Use one Surge Protector for every two wires. Stripping of wires is required. Each item has the following number of wires:

Junction Box or Sensor Interface Module (8)
Anemometer (4)
Leaf Wetness Sensor (3)
Rain Collector (2)
Solar Radiation Sensor (3)
Temperature Sensor (2)
Stainless Steel Temperature Probe (2)
Temperature/Humidity Sensor (5) 
UV Sensor (3)